Added several new cameras, released as of June 5, 2020.
NOTE: This is not the currently shipping version of the software. Future updates are not guaranteed. Download via Dropbox is not available.
Improvements
[Fixed] Small Fixes
New Camera Support
Fujifilm X-T4 (*1)
Leica SL2
Nikon D6
Panasonic DC-GX880 (*2)
Sony A7R IV (*3)
The ARQ format is the format of the RAW created from the RAW shot with "Pixel Shift Multi Shooting" in the Sony A7R IV. Not all features are supported, such as a demosaicing (*3)
Release Notes
"FILM SIMULATION" is supported and an available film simulation can be selected.
"Photo Style/Camera color" is supported and an available photo style can be selected.
Some functions are limited; "Demosaicing sharpness" is not available.
This update adds new Canon, Fujifilm, Nikon, Olypus and Sigma cameras and fixes for some issues. This update was released as of December 17, 2019.
Improvements
[Fixed] color reproduction differs greatly between output color space sRGB and AdobeRGB when select FILM SIMULATION "ETERNA/CINEMA" for RAW photos shot with Fujifilm cameras
New Camera Support
[NEW] Canon EOS M200
[NEW] Fujifilm X-Pro3 *1
[NEW] Nikon Z 50
[NEW] Olympus E-PL10
[NEW] Olympus OM-D E-M5 Mark III *2
[NEW] Sigma fp
Release Notes
"FILM SIMULATION" is supported and an available film simulation can be selected
RAW images shot with "High Res Shot" are not supported
This update fixes issues with certain Panasonic cameras. This update was released as of June 11, 2019.
Improvements
[Fixed] Fixed "Photo Style/Camera color" cannot be applied to RAW shot with the following Panasonic cameras: DMC-GF7, DMC-GM1, DMC-GM1S, DMC-GM5, DMC-TZ60, DMC-TZ61, DMC-TZ70, DMC-TZ71, DMC-ZS40, DMC-ZS50
This update fixes a batch development issue that applies primarily to Developer Studio Pro9 but is a part of the batch process system. This release is available as of March 28, 2019.
Improvements
Fixed the problem that the "Lightness" parameters of "Monochrome controller" may not be applied to the batch developed images
This update adds improved color reproduction using several Fujifilm camera models, support for the Fujifilm X-T30 and Ricoh GR III cameras. This update was released as of March 25, 2019.
Improvements
Improved color reproduction when using a specific FILM SIMULATION with the following cameras: Fujifilm X100F, X-A5, X-E3, X-Pro2, X-T2, X-T20, X-T100, XF10; target modes: PROVIA/STANDARD, Velvia/VIVID, ASTIA/SOFT, CLASSIC CHROME, PRO Neg. Hi, PRO Neg. Std (*2)
New Camera Support
[NEW] Fujifilm X-T30 (*1)
[NEW] Ricoh GR III
Release Notes
"FILM SIMULATION" is supported and an available film simulation can be selected
To enable this fix, select [Help] - [Troubleshooting] - [Delete temporary files] from the menu
This update adds general fixes, support for the Leica D-LUX7 and fixes for RAW files from Olympus and Canon cameras. This update was released as of February 7, 2019.
Improvements
[Fixed] RAW shot with Olympus E-M1 which updated to the latest firmware cannot open
[Fixed] Some RAW shot with Canon EOS Kiss M / M50 or EOS R were loaded extremely dark. To enable this fix, select [Help] - [Troubleshooting] - [Delete temporary files] from the menu.
[Fixed] Effect of "Portrait beautification" greatly differed between preview screen and development result when adjusting "Portrait beautification" and "Add noise" parameters at the same time.
[Fixed] Parameters of "Monochrome controller" recorded in the developed JPEG or TIFF could not be read using "Load development parameters".
[Fixed] Other small fixes
New Camera Support
[NEW] Leica D-LUX7
Release Notes
To enable this fix, select [Help] - [Troubleshooting] - [Delete temporary files] from the menu
This update adds a key fix plus supports two more Sony cameras. This update was released as of January 17, 2019.
Improvements
[Fixed] Effects of the "Spotting tool" not applied correctly for developed images when developing images from DNG files shot with Pentax "Pixel Shift Resolution"
[Fixed] "Automatic level correction" of "Tone curve" sub-control
[Improved]Lens Profiles: Editing of the "Lens profile" parameters for multiple selected images
[Improved]Lens Profiles: Partial paste of development parameters
SILKYPIX Developer Studio Pro9 9.0.5 adds several fixes, compatibility with Canon CR3 RAW files and new Canon and Leica cameras. This update was released as of December 20, 2018.
Improvements
[Fixed] Display rating set for Canon CR3 RAW files
[Fixed] Development parameters of unedited categories may also be copied pasting development parameters (*1)
[Changed] Checkbox of the edited categories in the "Development parameters applied by taste" checklist are checked when opening the "Add parameters taste" dialog to add an all categories taste
[Fixed] "Thumbnail scroll direction" of "Display settings" not changed when the thumbnail view in the "floating window" state
[Improved] Speed of creating the data file for lens profile
New Camera Support
[NEW] Canon PowerShot SX70 HS
[NEW] Leica M10-D
[NEW] Leica M10-P
Release Notes
Affects "Paste development parameters", "Paste temporary development parameters", and "Paste the last editing development parameters". Resolves the problem that unedited development parameters with a different initial value set for each image by the "dynamic default" function are copied when all parameters in the category are unedited.
SILKYPIX Developer Studio Pro9 9.0.4.1 fixes a single but critical issue. This update was released as of December 6, 2018.
Improvements
[Fixed] Unexpected values may be set in development parameters for selected images other than the "Representative image" when the development parameters saved using "Save development parameters" is applied to multiple images using "Load development parameters"